Motorola WA840GP User Guide - Page 47
Options related to: ENABLING THE WA840 BUILT-IN DHCP SERVER, Options related
UPC - 612572118740
View all Motorola WA840GP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Configuration Section 3 Field Default Gateway: (ADVANCED) Description Sets the IP address of the default gateway for the WA840 connections, when the Protocol field is set to Static. The default gateway is set by default to be the WA840 (i.e., the factory default IP address matches that of the WA840). NOTE: If Protocol (above) is set to DHCP, this field will be greyed out, and any data entered will not be used. FACTORY DEFAULT: 192.168.40.1 Options related to: ENABLING THE WA840 BUILT-IN DHCP SERVER Field DHCP Server: (ADVANCED) DHCP Starting IP Address: (ADVANCED) Description Sets the method by which IP addresses are assigned to devices that interface with the WA840 via the wireless connections (or "clients"). • Selecting Enabled engages the Dynamic Host Configuration Protocol (DHCP) server, which can dynamically assign (or "lease") IP addresses to clients. • Selecting Disabled disengages the DHCP server, requiring that you manually assign unique and permanent (or "static") IP addresses to clients. NOTE: The built-in DHCP Server is a router function. Therefore, this field, and the related DHCP Server fields below, are disabled or ignored if the Operation Mode on the BASIC Page is set to Access Point. NOTE: You will need to disable the DHCP Server, and assign static IP addresses, if you wish to use features on the ROUTING Page. FACTORY DEFAULT: Disabled Sets the start of the IP address range that the DHCP server will lease to clients. NOTE: This field is ignored if the DHCP Server (above) is Disabled. FACTORY DEFAULT: 192.168.40.2 WA840 3-13