NEC 870 User Guide - Page 22
Connecting the Interface Cable, Installing the Face-up Output Tray
UPC - 050927215162
View all NEC 870 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Chapter 1: Setting Up the Printer Connecting the Interface Cable Use an IEEE 1284 compliant parallel cable (6 ft. recommended) to connect the SuperScript 870 to a computer. 1. Make sure the printer and the computer are both turned OFF [O]. 2. Connect one end of the interface cable to the parallel port of the computer. 3. Connect the other end of the cable to the parallel port connector on the back of the printer. Secure the lock springs on the port connection. Installing the Face-up Output Tray The Face-up output tray receives printed pages, printed side up, as they are output to the rear of the printer. For uses of this tray, see Chapter 6, "Using the Printer." The maximum capacity of this tray is 50 sheets. 1. Remove the Face-up output tray from its packaging. 2. Gently bow the Face-up output tray inwards, toward the printer, with both hands. Align the insertion pins of the tray with the pin holders of the printer. 22