NEC 870 User Guide - Page 27
Table 2-1: Condition Indications and Solutions
UPC - 050927215162
View all NEC 870 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Chapter 2: Operator Panel Table 2-1: Condition Indications and Solutions LEDs CONDITION CAUSE/SOLUTION All lit steady Printer hardware error A printer hardware error is detected. Possible printer errors include malfunction of the Fuser unit, Laser unit, Scanning motor, or Fan. Corrective Action: First power off the printer and then turn the power back on. If the problem continues, contact your NEC dealer for service or call NEC technical support (see Chapter 10). All lit then cycle all Factory default LEDs reset During power up, press the Operator panel button until the lights stop cycling, then release. After that, the green light blinks until the printer is ready to accept a job. All lit then cycle all Power on LEDs When you power on the printer all the LEDs light, then cycle through beginning with the On Line LED. The lights continue to cycle until initialization is complete. The On Line light will continue to blink until the printer is warmed up sufficiently to print. 27