NEC 870 User Guide - Page 97

Maintaining Your Printer

Page 97 highlights

3. Gently lift out the Toner module . Warning! Do not touch the Fuser unit. It may be extremely hot. The Fuser unit is clearly labeled and located behind the Toner module area. 4. Rock the Toner module gently, five or six times, to redistribute the toner. Chapter 8: Maintaining Your Printer 5. Holding onto the Toner module's handle, lower it into the printer, making sure the four pins (two on each side) fit into the guides and match the markings inside the printer. 6. Gently but firmly close the Top cover of the printer. 97

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158

97
Chapter 8: Maintaining Your Printer
5.
Holding onto the Toner module’s handle,
lower it into the printer, making sure the four
pins (two on each side) fit into the guides and
match the markings
inside the printer.
6.
Gently but firmly close the Top cover of the
printer.
3.
Gently lift out the Toner module
.
Warning!
Do not touch the Fuser unit. It
may be extremely hot. The Fuser unit is
clearly labeled and located behind the
Toner module area.
4.
Rock the Toner module gently, five or six
times, to redistribute the toner.