NEC 870 User Guide - Page 30

Chapter 2: Operator Panel Table 2-1: Condition Indications and Solutions LEDs CONDITION CAUSE/SOLUTION Paper (amber) blinks No paper This occurs when processing with the Multi-purpose tray or 500Sheet cassette is empty. Corrective Action: Load paper into the tray. On Line (green) blinks In use On Line (green) blinks slowly Energy Saving On Line (green) double blinks Waiting The on line LED blinks while the printer is processing a job from your computer or while finishing printer warm-up and initialization. This includes waiting for the computer to send additional data or waiting for the printer engine to move paper. Pressing the Operator panel button causes the printer to pause printing. The printer's memory cache can accept and process data during warmup time. The LED blinks slowly while the printer is in Energy Saving Mode. Energy Saving Mode starts after the printer has been ready as long as specified by the Energy Saving Mode setting. The printer exits Energy Saving Mode when it receives a job, or the Operator panel button is pressed. PCL data left in the printer. Corrective Action: Pressing the Operator panel button will cause a form feed then resume to ready. • "Blink" always means 0.5 seconds on, 0.5 seconds off, then repeats. • "Slow blink" is 0.5 seconds on and 5.0 seconds off, then repeats. • "Double-blink" means 0.25 seconds on, 0.25 seconds off, 0.25 seconds on, 1.0 second off, then repeats. 30