Panasonic HVX200A Operating Instructions - Page 32

Using SD memory cards You can use SD memory cards to save and load SCENE files and USER files. (Page 56) Installing and removing the SD memory card Installation 1 Open the cover, and insert the card while making sure it is oriented in the proper direction. Access lamp LOCK TAPE 5 On the menu, select OPERATION, FORMAT and then SD CARD. • Select EXIT to cancel the formatting. 6 Select YES on the confirmation screen. • The selected SD memory card is formatted. You can also format from the SD CARD FORMAT option on the CARD FUNCTIONS screen. (Page 114) 2 Close the cover. Removal 1 Open the cover, and check that the access lamp is not lit. 2 Press the card further into the unit, grasp the card, and then remove. 3 Close the cover. Formatting SD memory card 1 Switch the MEDIA switch to "P2". 2 Set the POWER switch to ON. (Page 20) 3 Press the mode button and set it to MCR mode (the MCR/VCR lamp lights). 4 Press the MENU button. Cautions in using SD memory cards • SD memory cards used with the AG-HVX200 should conform to SD standards. Be sure to format cards using the AG-HVX200. To format SD memory cards using a personal computer, download the dedicated software from the support site. SD memory cards with the following capacity (8MB - 1GB) can be used for the AG-HVX200: 8 MB 128 MB 16 MB 256 MB 32 MB 512 MB 64 MB 1 GB For the latest information not available in the Operating Instructions, visit the P2 Support Desk at the following Web sites. https://eww.pavc.panasonic.co.jp/pro-av/ • SD memory cards must not be used or stored in an environment where they may be Exposed to high temperatures/humidities; Exposed to water droplets; or Electrically charged. • Be sure always close the cover when using an SD memory card. • You cannot use the SD memory card in the TAPE mode. 32