Panasonic HVX200A Operating Instructions - Page 62

Basic playback operations (P2 card) P2 1 Before turning the POWER switch to ON 2 Set the MEDIA switch to the P2 position. Lock release 2 Turn the POWER switch to ON. While pressing the lock release, turn the POWER switch to ON. 3 CAMERA MCR VCR 1 3 Press the mode button so the MCR lamp turns on. The camera is now in the MCR mode. • Each time you press the button, the mode changes as below. MCR CAMERA PC DUB P2 TAPE When you press the mode button while MCR is selected, the unit enters the PC (PC connection) mode. (Page 82) For details on playing back clips using thumbnails, see page 64. Operations using the OPERATION button Remote Control -V Play ( ) When this button is pressed in stop mode, playback will start from the first clip selected. During playback, the unit enters the variable speed search mode and starts 1x playback. (Page 73) /REW PLAY FF/ STILL ADV PAUSE STILL ADV INDEX STOP INDEX -V Fast-forward ( ) When this button is pressed during playback, the clips are advanced from a point in the clip already selected (at four times normal speed). When the thumbnail screen is cancelled, you can also perform this operation while the camera is stopped. When this button is held down, the playback speed becomes faster (32x speed). When pressed during a pause, playback advances one clip. /REW PLAY FF/ STILL ADV PAUSE STILL ADV INDEX STOP INDEX -V Rewind ( ) When this button is pressed during playback, the clips are rewound from a point in the clip already selected (at four times normal speed). When the thumbnail screen is cancelled, you can also perform this operation while the camera is stopped.When this button is held down, the playback speed becomes faster (32x speed). When pressed during a pause, playback goes back one clip. /REW PLAY FF/ STILL ADV PAUSE STILL ADV INDEX STOP INDEX -V Stop ( ) /REW PLAY FF/ STILL ADV PAUSE STILL ADV INDEX STOP INDEX -V Pause ( ) Press again to return to playback. /REW PLAY FF/ STILL ADV PAUSE STILL ADV INDEX STOP INDEX 62