Panasonic HVX200A Operating Instructions - Page 35
Native, recording, Standard recording
UPC - 791871303351
View all Panasonic HVX200A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Shooting P2 Nativerecording Standard recording 1 Using the REC FORMAT (P2) function (page 106) on the RECORDING SETUP screen, select 720/30PN or 720/24PN as the recording format 2 Select the appropriate scene file using the SCENE FILE dial. If necessary, before doing this, perform the camera settings from the setting menu, and register the scene file. (page 54) 3 Using the OPERATION TYPE function (page 100) on the SCENE FILE screen, select FILM CAM, and set the desired recording frame rate using the FRAME RATE function (page 100). 4 Press the START/STOP button to start or stop native recording in VFR mode. • No signals are output from the 1394 terminal during recording or recording standby in the native mode. • Sound is not recorded. However, sound will be recorded when the same frame rate is used for both recording and playback. • When a recorded clip lasting a long time is to be played back and imported using a nonlinear editing system that supports Varicams, the UB MODE option on the RECORDING SETUP screen must be set to FRM.RATE. • If the effective frame information is to be carried over when recording onto this camerarecorder from a nonlinear editing system that supports Varicams, the 1394 UB REGEN option on the RECORDING SETUP screen must be set to ON. • After editing, materials are output from the nonlinear editing system in 1080i/24P or 720P/60P (24P over 60P) format. 1 Using the REC FORMAT (P2) function (page 106) on the RECORDING SETUP screen, select 720P/60P, 720P/30P or 720P/24P as the recording format 2 Select the appropriate scene file using the SCENE FILE dial. If necessary, before doing this, perform the camera settings from the setting menu, and register the scene file. (page 54) 3 Using the OPERATION TYPE function (page 100) on the SCENE FILE screen, select FILM CAM, and set the desired recording frame rate using the FRAME RATE function (page 100). 4 Press the START/STOP button to start or stop standard recording in VFR mode. • Sound is recorded. • In the case of a nonlinear editing system that supports Varicams equipped with an effective frame extraction function, you can upload even undercrank or overcrank shooting materials as is. (The UB MODE option on the RECORDING SETUP screen must be set to FRM.RATE.) • After editing, materials are output from the nonlinear editing system in 1080i/24P or 720P/60P (24P over 60P) format. • The 24P format is used for 2:3 pull-down recording; the 30P format is used for 2:2 pulldown recording. There may be slight discrepancies between the recording frame rate displayed and the frame rate at which the images are actually recorded. Refer to the table below. Recording frame rate displayed 60 48 36 32 30 26 24 22 20 18 12 Frame rate at which images are actually 59.94 48.17 35.68 32.11 29.97 26.44 23.98 22.48 19.55 17.98 12.26 recorded 35