Panasonic HVX200A Operating Instructions - Page 50

Adjusting the shutter speed SHUTTER button SPEED SEL button BARS RESET SHUTTER SPEED SEL CH 1 SELECT CH 2 SELECT INPUT 1 INPUT 2 INT(L) INPUT 1 INPUT 2 INT(R) INPUT 2 ON ON OFF OFF AUDIO MIC POWER +48V COUNTER RESET/TC SET ZEBRA OIS • Remember that the faster the shutter speed, the lower the sensitivity. • If iris is set to auto, then it will open wider with higher shutter speeds and thereby reduce focal depth. • It will take longer to focus when the shutter speed has been reduced so it is recommended that the unit be secured to a tripod, etc. for use. 1 Press the SHUTTER button. Each time you press the SHUTTER button, the shutter speed switches between normal (OFF) and the speed you selected with the SPEED SEL button. 2 After you have pressed the SHUTTER button, press SPEED SEL to select the shutter speed. The shutter speed changes as follows each time you press SPEED SEL + (The order is reversed for the SHUTTER SEL - button.) PUSH STILL The current shutter speed appears on the viewfinder and LCD screens unless you have selected OFF in OTHER DISPLAY in the DISPLAY SETUP screen of the setup menus. It is not displayed if you have set the shutter speed to normal (OFF). When FILM CAM is selected as the OPERATION TYPE option setting (Page 100) With the 1080i/60i, 720/60P and 480/60i formats Standard (OFF) SYNCRO SCAN 1/60 1/2000 1/100 1/120 All other formats (30P, 24P, 24PA) Standard (OFF) SYNCRO SCAN 1/30(1/24) 1/60 1/50 1/1000 1/250 1/120 1/500 1/250 1/1000 1/500 When VIDEO CAM is selected as the OPERATION TYPE option setting (Page 100) (slow shutter speeds are underlined) With the 1080i/60i, 720/60P and 480/60i formats Standard (OFF) SYNCRO SCAN 1/15 1/30 1/60 1/1000 1/2000 With the 30P formats Standard (OFF) SYNCRO SCAN 1/15 1/30 1/50 1/1000 With the 24P, 24PA and 24PN formats Standard (OFF) SYNCRO SCAN 1/24 1/60 1/50 1/1000 1/100 1/120 1/250 1/500 1/60 1/120 1/250 1/500 1/120 1/250 1/500 50