Panasonic HVX200A Operating Instructions - Page 90
Screen displays
UPC - 791871303351
View all Panasonic HVX200A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Screen displays Regular displays 1 Time code displays Each time you press the COUNTER button, the display switches over to the following data (or no indication). COUNTER: (Tape or P2-camera mode only) Counter value M COUNTER: (Tape only) Counter value in memory stop mode TC: Time code value. When the time code value could not be read correctly from the tape, [TC*] is displayed. When it acts in drop frame mode, the colon between seconds and frames become ".". UB: User information When user information could not be read correctly from the tape, [UB*] is displayed. FR: Frame rate information for recording FR 60I : Standard (60i interlace) mode (60 fields/sec.) FR 60P : 60P progressive mode (60 frames/ sec.) FR 30P : 30P progressive mode (30 frames/ sec.) FR 24P : 24P progressive mode (24 frames/ sec.) FR 24PA : 24P advanced mode When in FR24P and FR 24PA mode, the sequence information of the frame conversion at the final place. 2 Warnings REMOTE: Blinks when the wrong equipment setting is selected on the remote control unit. : Lights when condensation has formed inside the camera-recorder. : Blinks when cylinder heads are dirty. P2 or : Blinks when a P2 card or tape has not been inserted, or when the camera is in a writeprotected state. P2 FULL or END: Blinks when either there is no remaining capacity in the P2 card or the tape has reached the end. P2 LACK: Blinks in the loop rec mode when the remaining capacity of the P2 card is insufficient. : Lights when the internal battery for the calendar has run out. 3 AUTO/MANUAL switch operation display This display appears if a function which has been set on the setting menu AUTO SW screen is operating when the AUTO/MANUAL switch has been pressed. 90