Panasonic HVX200A Operating Instructions - Page 77

Computer (non-linear editing/file transfer) File transfer/nonlinear editing Computer USB cable (optional) • For a Windows computer Mini-B type USB 2.0 4-pin type 1394 1394 cable (optional) • For an Apple Macintosh computer • For details on the computer's conditions and other factors, see page 82. 1394AVC transfer/nonlinear editing Computer (Windows/Apple Macintosh) Editing 4-pin type 1394 1394 cable (optional) • When controlling this camera from a non-linear editor, cancel the thumbnail screen on the camera. (Page 66) • No guarantees are given for images and audio signals which are output simultaneously from the camera- recorder while data is being transferred from a computer to the camera-recorder. When connecting the unit to an Apple Macintosh computer • Connect the 1394 cable after turning on the power of the Apple Macintosh computer. Otherwise, the unit may not be mounted. • The unit may not be recognized after the Apple Macintosh computer has been placed in the hibernation state by its power-saving setting. In this case, disconnect the 1394 cable and then re-connect it. If the unit is not mounted properly on an Apple Macintosh computer • When the P2 card access lamp flashes orange 1. Select [Applications] ĺ [Utilities] ĺ and start up [Disc Utility]. 2. Select a grayed-out volume among volumes of the X.X GB Panasonic disc, and click "Mount." • When the P2 card access lamp is off Eject the P2 card, and insert it again. If the unit is still not mounted, disconnect the 1394 cable and then re-connect it. Hard disk drive (data copying) Hard disk drive 4-pin type 1394 1394 cable (optional) 77