Pioneer PDP-6010FD Owner's Manual - Page 21

Preparation 05 English 5 Connect the supplied speaker cables to the back of plasma display. Connect the cables correctly with respect to the polarity of the plasma display and the speaker terminals, that is,  cable to  terminals and  cable to  terminals. To do so, connect the gray cable to the  terminals and the white cable to the  terminals. Gray Black Gray 6 Connect the other end of the speaker cables to the speaker. Connect the cables correctly with respect to the polarity of the plasma display and the speaker terminals, that is,  cable to  terminals and  cable to  terminals. To do so, connect the gray cable to the  terminals and the white cable to the  terminals. Black Gray Red Black Red Black Speaker terminal Red Speaker terminal Speaker cable Speaker terminal Note • Press the lever and insert the end of the cable. • When you release the lever, it clamps onto the speaker cable. Caution Lever • Be sure to turn the connected devices off and remove the power cord from the wall outlet beforehand when changing the connection or installation method. • If you insert the speaker cable too far so that the insulation is touching the speaker terminal, you may not get any sound. Please insert it with showing the copper wire. • Check if the end of the speaker cables are securely connected to the terminals by slightly tugging on the cable after making connections. Loose connections may result in sound dropouts or noise. • If there is a short in the  and  cables caused by an exposed lead wire, excessive load may be applied to the plasma display, resulting in interrupted operation or malfunction. • Incorrect connections of the speaker cable to the right or left of the plasma display terminals with respect to the polarity may result in insufficient stereo sound effects, delivering poor bass sounds or unstable sound image. • Bundle the cord without pulling the cord. 7 Bundle the cables. • Bead bands are included with the plasma display. • Use the bead bands as necessary. • When tidying up your speaker cables, make sure to bundle them so that they are not subjected to any pressure. Speaker cable Rear view Bead band 21 En