Pioneer PDP-6010FD Owner's Manual - Page 74

12 Enjoying through External Equipment Switching the optical audio signal type Set up for the DIGITAL OUT terminal (OPTICAL), depending on your AV receiver. 1 Press HOME MENU. 2 Select "Option" ( / then ENTER). 3 Select "Digital Audio Out" ( / then ENTER). 4 Select "Dolby Digital" or "PCM" ( / then ENTER). Item Dolby Digital (default) Description For Dolby Digital encoded signals, outputs in the Dolby Digital format. For PCM encoded signals, outputs in the PCM format. PCM Always outputs in the PCM format regardless of the types of signals 5 Press HOME MENU to exit the menu. Watching an image from a personal computer Connecting a personal computer Use the PC terminals to connect a personal computer. Note • The PC input terminals are DDC2B-compatible. • Plug & Play may not correctly function, depending on the personal computer in use. 4 5 4 5 Rear view Viewed from below of the plasma display RGB cable (commercially available) AV cable with a mini plug (commercially available) (When PC audio is connected) Personal computer Displaying an image from a personal computer When connected to a personal computer, the input signal type is automatically identified. If the personal computer image does not come in clearly, you may need to use Auto Setup. See page 66. To watch an image coming from the personal computer, press PC on the remote control unit or press INPUT on the plasma display to select "PC". Note • The PC terminals cannot be used for audio-visual equipment. Signal names for 15-pin mini D-sub connector 543 21 10 9 8 7 6 15 14 13 12 11 Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Signal name R G B Not connected Not connected GND (ground) GND (ground) GND (ground) +5 V GND (ground) Not connected SDA HD VD SCL Computer compatibility chart Resolution 720 x 400 640 x 480 (VGA) 800 x 600 (SVGA) 1280 x 720 1024 x 768 (XGA) 1360 x 768 (Wide-XGA) 1280 x 1024 (SXGA) Frequency 70 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 74 En