Pioneer PDP-6010FD Owner's Manual - Page 75

Enjoying through External Equipment Connecting control cords Connect control cords between the plasma display and other Pioneer equipment having the logo. You can then operate the connected equipment by sending commands from its remote control unit to the remote control sensor on the plasma display. After the CONTROL IN terminals have been connected, the remote control sensors on the connected equipment do not accept commands from the remote control units. Face the remote control units to the remote control sensor on the plasma display when operating the connected equipment. Note • Make sure that the power is turned off when making connections. • Complete all component connections before making control cord connections. About SR+ The CONTROL OUT terminal on the rear of the plasma display supports SR+, which allows linked operations with a Pioneer AV receiver. SR+ presents functions such as the input switch linkage operation function and the DSP surround mode display function. For more information, see the instruction manual that came with the Pioneer AV receiver supporting SR+. Note • When making control cord connections, use the SR+ cable. • When making control cord connections with one or more pieces of Pioneer equipment, directly connect the plasma display and the Pioneer amplifier that supports SR+. Do not connect other equipment between them. • When the connected equipment is being operated using SR+, the volume on the plasma display is temporarily reduced. Plasma display 4 5 Rear view CONTROL IN OUT CONTROL IN OUT 12 a b English c CONTROL IN OUT When SR+ is not used (a, b, and c): The control cables (commercially available) are mono sound cables with mini plugs (no resistance). When SR+ is used (a): Use the SR+ cable (available as option). 75 En