Pioneer PDP-6010FD Owner's Manual - Page 36

06 Basic Operations Setting MTS/SAP mode When watching conventional TV programs, you may enjoy stereo sound and/or Secondary Audio Programs (SAP), using the Multichannel Television Sound (MTS) function. • Stereo broadcasts You can enjoy, for example, sports, shows, and concerts in dynamic stereo sound. • SAP broadcasts MAIN sound: The normal program soundtrack (either in mono or stereo). SAP sound: Listen to second language, supplementary commentary and other information. (SAP is mono sound.) Note • Conventional TV channels in this manual designate TV channels that are received through the conventional VHF/UHF frequencies or conventional cable TV channels. • When stereo sound is difficult to hear, you may manually switch to the MONO mode to obtain clearer sound. • Once the MONO mode is selected, the plasma display sound remains mono even if the system receives a stereo broadcast. You must reselect the STEREO mode if you want to hear stereo sound again. • Selecting MTS while the input source is INPUT 1 to INPUT 7 or PC does not change the type of sound. In this case, sound is determined by the video source. • The MTS button is disabled while the TV Guide On Screen™ system is displayed. • In each of the MTS/SAP modes selected, the display changes depend on broadcast signals being received. When receiving STEREO sound signals A 125 STEREO In STEREO mode A 125 STEREO In SAP mode A 125 MONO In MONO mode When receiving MONO + SAP sound signals A 125 MONO (SAP) In STEREO mode A 125 SAP (MAIN) In SAP mode A 125 MONO (SAP) In MONO mode When receiving STEREO + SAP sound signals A 125 STEREO (SAP) In STEREO mode A 125 SAP (STEREO) In SAP mode Each time you press MTS, MTS toggles as shown below. STEREO mode SAP mode MONO mode STEREO SAP MONO A 125 MONO (SAP) In MONO mode When receiving MONO sound signals A 125 MONO In STEREO mode A 125 MAIN In SAP mode A 125 MONO In MONO mode 36 En