Pioneer PDP-6010FD Owner's Manual - Page 79

Using the HDMI Control 13 English Chapter 13 Using the HDMI Control Using the HDMI Control functions You can operate such Pioneer devices as a recorder, player or AV system support the HDMI Control functions using the remote control of the plasma display. The HDMI Control functions include playback of content using on-screen control panel on the plasma display. For details, see the table below. Note • Maximum number of devices that can be connected and controlled using the remote control unit of the plasma display is as follows: recorder x 2, player x 2, AV system x 1. • Not all device operations may be available for HDMI Control functions. HDMI Control functions Function Description Usable devices Playback of The proper input source is automatically selected Recorder/ content and the content is played back on the plasma player display as you press PLAY on the connected device On-screen control Recorder/player operation can be controlled onscreen or with the remote control unit of the plasma display (play, stop, fast forward/reverse, etc.) Recorder/ player Display Language Setup Information on the display menu language is transferred to the recorder or player connected to the plasma display. For details, see the operation manual that came with the recorder or player. Recorder/ player AV system control Receiver/amplifier operation can also be controlled AV system with the remote control unit of the plasma display (volume, surround mode and input selection of the HDMI terminal) Power On The plasma display can be turned On when the Recorder/ connected recorder(s) or player(s) is turned On and player images are input to the plasma display. Power Off The connected device(s) can be turned Off when the plasma display is turned Off Recorder/ player/AV system • Press VOL+/- or e to adjust volume for the AV system. • Press , , , , ENTER, RETURN ( ) or color (BLUE, RED, YELLOW, GREEN) buttons to use functions such as the disc navigator on the connected recorder or player. Note • When using the HDMI Control functions, operate the remote control unit while pointing it toward the remote control sensor (t) located at the bottom right of the front panel of the plasma display. • You cannot use two or more HDMI terminals at the rear of the plasma display at the same time except "Power Off" and "Display Language Setup" functions. 79 En