Ricoh 3245 Scanner Reference - Page 109
Settings, Scan Settings
UPC - 026649128660
View all Ricoh 3245 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Settings Scan Settings This section explains how to set the defaults for scan settings. The scan settings consist of the following. For the table about settings and defaults, see p.97 "Scanner Features". ❖ Default Scan Settings Various basic settings (scan type, resolution, image density, and scan size) can be set. You can register the scan settings in the same way as specifying them. For details, see p.73 "Specifying Scan Settings". • Scan Type • Resolution • Image Density • Scan Size ❖ Wait Time for Next Orig.: Exposure Glass When dividing originals and scanning them individually with the exposure glass to form a single file, select [Off], [Set Wait Time], or [Continuous Wait] for the waiting status. Note ❒ If [SADF] or [Batch] is specified as [Original Feed Type] when scanning, this setting is invalid. For details, see p.77 "Batch/SADF selection". ❒ If [Off] is selected, sending will start automatically after one page of original is scanned. Settings ❒ If [Set Wait Time] is selected, enter the wait time in seconds (3999) for placing additional originals with the number keys. Scanning will start if additional originals are placed and the {Start} key is pressed within this time. You can end scanning and begin transmission by pressing the {#} key within this time. Once the specified time has elapsed, transmission starts automatically. ❒ If [Continuous Wait] is selected, the machine will wait for additional originals until the {#} key is pressed. Scanning will start when additional originals are placed and the {Start} key is pressed. You can end scanning and begin sending by pressing the {#} key. ❒ If originals are placed in the au- tomatic document feeder (ADF), transmission will start without waiting for additional originals after all originals in the ADF have been scanned, re- 9 gardless of the specified set- tings. ❒ If a paper misfeed occurs or any of the following operations is performed while the machine is waiting for additional originals, the countdown stops and does not start again until the {#} key is pressed. • Changing the settings such as the scan settings • Opening the upper cover of the ADF • Pressing the {Interrupt} key to activate the copy mode 101