Ricoh 3245 Scanner Reference - Page 66
Preparation for Delivering
UPC - 026649128660
View all Ricoh 3245 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Delivering Scan Files Preparation for Delivering To use the machine as a network delivery scanner, the preparation described below is required. Connect the machine to the network with an Ethernet cable or IEEE 1394 cable, or use wireless LAN. To connect using an IEEE 1394 cable, the IEEE 1394 interface board is required. To connect using wireless LAN, the IEEE 802.11b interface unit is required. See Network Guide. To deliver scan files, the following [System Settings] settings must be specified correctly. (Certain other settings must also be specified.) 5 • IP address • subnet mask Also, [On] must be selected for [Delivery Option] under [File Transfer]. For details about making settings and other settings, see Network Guide. Make settings for the network delivery scanner function, such as Destination List Settings. See p.97 "Initial Scanner Setup". Install the ScanRouter delivery software required for using the network delivery scanner functions on the delivery server. See p.12 "DeskTopBinder". After installing the software, make the required settings for server maintenance and delivery service. For details, see the ScanRouter delivery software manuals. Set the destination, sender information, and connected devices in the ScanRouter delivery software. On the client computers, install the software required for viewing or retrieving files by connecting to the delivery server, such as DeskTopBinder. See p.12 "DeskTopBinder". 58