Ricoh 3245 Scanner Reference - Page 46
Manual In, Password, System Settings, Change, Connection Test, Cancel, Prev., Clear/Stop, Check, Modes
UPC - 026649128660
View all Ricoh 3245 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Sending Scan Files by Scan to Folder Note ❒ For details about the maximum number of characters that can be entered, see p.120 "Scan to Folder". ❒ The following is an example of a path where the folder name is "user" and the subfolder name is "lib": user\lib 3 H Press [OK]. I If entering a user name to log on is required, press [Manual In- put] on the right side of the user name field. The soft keyboard appears. J Enter the user name. Reference For details about the maximum number of characters that can be entered, see p.120 "Scan to Folder". K Press [OK]. L If entering a password to log on is required, press [Manual Input] for [Password]. The soft keyboard appears. M Enter the password. N Press [OK]. O To change the port number which is set in [System Settings], press [Change] on the right side of the port number field. Enter a port number using the number keys, and then press the {#}key. P Press [Connection Test]. A connection test is performed to check whether the specified shared folder exists. Note ❒ The connection test may take time. ❒ You may not be able to press [Connection Test] right after pressing [Cancel] during a connection test. Q Check the connection test result, and then press [Exit]. R Press [OK]. S To enter more destinations, repeat steps A to R. Note ❒ To deselect a destination, press [UPrev.] or [TNext] to display the destination in the destination field, and then press the {Clear/Stop} key. ❒ To change the path for the folder that has been entered, press [Change] on the left side of the destination field. Enter the correct path for the folder, and then press [OK]. ❒ To check the selected destinations, press the {Check Modes} key. 38