Ricoh FW780 Service Manual - Page 108
Mode No., Function
View all Ricoh FW780 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Mode No. Total Copy Length/Number Display 70 to 75 Function Displays the total copy length/number according to the following units. SP70 = Yard SP71 = meter SP72 = 100 inches SP73 = 50 inches SP74 = A1 length (594 mm) SP75 = sheet (any size) Data SP70: t0 = XXX,XXX SP71: t1=XXX,XXX SP72: t2=XXX,XXX SP73: t3=XXX,XXX SP74: t4=XXX,XXX SP75: t5=XXX,XXX OPC Counter 76 Developer Counter Display 77 Toner Counter Display 78 Toner Supply Level Indication 79 Number of Misfeeds by Location 80 to 85 Displays the total length of copied paper after do = XX,XXX the OPC drum is installed. This counter should be cleared when the OPC drum is replaced. (SP #--1) Displays the total length [m] of copied paper after the new developer is poured. dE = XX,XXX This counter is automatically cleared when the new developer initialization is done. Displays the total length of copied paper [m] after a new toner cartridge is installed. dt = XX,XXX This counter is automatically cleared when the new toner cartridge is installed. Indicates the present toner sensor level. dL = ab -- -- c a: Toner density setting n, H, L b: TS level 0 ~ 5 c: Copy number step 0: ~30m 1: ~60m 3: ~90m 4: ~120m 5: ~150m 6: 150m ~ Displays the total number of paper misfeeds J = XXX by location. Misfeed location codes displayed Jt = Total Jam in each SP number are as follows: SP80: Jt, J90, J98, J99 SP81: J01, J02, J03, J04 SP82: J20, J21, J22, J23 SP83: J30, J31, J32 SP84: J40, J41, J42, J43 SP85: J56, J57, J58, J59 A163 4-16 SM