Ricoh FW780 Service Manual - Page 274
Mode No., Function, Note1, Toner End Number
View all Ricoh FW780 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 274 highlights
SERVICE TOOLS Mode No. RAM Clear -1 Function Clears selected data items from the RAM. To clear the memory, input the number of the item you want to delete, then press the key. Note: If all the memory is cleared (if a number from 20 to 28 is selected), reinput the factory settings that are shown on the decal attached inside the upper right cover. Please refer to page 4-14 for the default settings for each destination. (When No. 10 to 26 is selected.) Data 0: Not Used 1: Machine Operation (The memory for SP67) 2: Copy Length Counter (SP69 to 75) 3: OPC Counter (SP76) 4: Developer Counter (SP77) (*Note1)/ Developer Initialization Number (SP80) 5: Toner Counter (SP78) /Toner End Number (SP81)/Toner Near End Number (SP82) 6: Counter for toner density step. (*Note2) 7: Clear data No.1 to 9 and 53. 8: SC Counter (SP90 to 91) 9: Jam Counter (SP85 to 86) 10: Change the settings to the Japan version *Note1: This counter is not used for the toner density step control (described on page 2-16 in the A163 manual). *Note2: For the toner density step control, this counter counts down from 150 (m) to 0 (m) after the developer initialization. When the developer initialization is done, this counter is set to 150 and after 150 m of copies, the counter stays at 0. If this counter is cleared, the counter is set to 0. A251/A252 4-4 SM