Ricoh FW780 Service Manual - Page 121

3.2.3 OUTPUT CHECK MODE TABLE Press the key to turn on the selected electrical component. The status of the component is displayed on the paper length indicator. To turn off the component, press the key again. Program No. Electrical Component 0 Main Motor 1 Toner Supply Clutch 2 Pick off solenoid 3 Registration Clutch 4 Total Counter 5 Pre-transfer Lamp 6 Quenching Lamp 7 Fusing Lamp 8 Exposure Lamp (100% duty ratio) 9 Exposure Lamp (selected ID level) 10 Main Charge Corona 11 Grid Voltage 12 Transfer Charge Corona 13 Not Used 14 Separation Charge Corona 15 to 19 Not Used 20 Bias Voltage for the Image Area 21 Bias Voltage for the Non-image Area 22 Main Charge Corona + Grid Voltage Main Motor + PTL + Bias Voltage for 23 the Non-image Area + Quenching Lamp 24 to 25 Not Used 26 Roll Feeder Dehumidity Heaters 27 Roll Feeder Cutter Motor*Note 28 Roller Feeder Paper Feed Motor NOTE: The cutter unit continuously moves between the left and right cutter switches. The number of the movement (0~9999) is displayed on the paper length indicator. SM 4-29 A163