Ricoh FW780 Service Manual - Page 461

8)',2-'%0#7)6:-')#&900)8-2 „ FIRMWARE Note: This copy is intended as a master original for reproduction of additional bulletins. &900)8-2#291&)6U %EJGg#NNF %440-'%&0)#13()0U ####+)78)82)6#h#2f% ####6-'3,#h#*;KHN ####7%:-2#h#2f% SUBJECT: UPDATED ENERGY STAR REQUIREMENTS GENERAL: The following parts updates are being issued for all A163 Parts Catalog. NIfEIfML • UPDATE 1: OPERATING INSTRUCTIONS - The Operating Instructions have been changed to announce changes concerning Energy Star (115V). OLD PART NO. NEW PART NO. DESCRIPTION A1638637 A1638647 Operating Instructions- Energy Star (115V) REFERENCE QTY INT PAGE ITEM 1 3 43 6 • UPDATE 2: AUTO SHUT-OFF TIME - Auto Shut-Off Time has been changed from "1 to 120 minutes" to "1 to 240 minutes". The change has been made to SP Mode 15. See Table below. Mode No. Old Data 15 Auto Shut-Off Time Setting (115 V) 1 to 120 Minutes (1 Minute per step) Default: 30 Minutes New Data 1 to 240 Minutes (1 Minute per step) Default: 30 Minutes PART NO. A1635208 A1635230 DESCRIPTION ROM Main Board OLD SUFFIX No Suffix A NEW SUFFIX A B QTY 1 1 REFERENCE PAGE ITEM 39 1 35 7 The Main Board ROM revision A (file name 740A1A.EXE) can be downloaded through the Ricoh Technical Services BBS. NOTE: For more information about the Ricoh Technical Services BBS, order the Guide to Operation (P/N BBS00001) through normal NSPC channels. INTERCHANGEABILITY CHART: 0 OLD and NEW parts can be used in both OLD and NEW machines. 2 NEW parts CAN NOT be used in OLD machines. OLD parts can be used in OLD and NEW machines. 1 NEW parts can be used in OLD and NEW machines. OLD parts CAN NOT be used in NEW machines. 3 OLD parts CAN NOT be used in NEW machines. NEW parts CAN NOT be used in OLD machines. 3/S Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured after the S/N cut-in or units previously modified, use the new individual part numbers. RICOH GROUP COMPANIES #'328630#23T#FLI