Samsung GX10 User Manual (ENGLISH) - Page 216
Set the SEF-36PZF / SEF-54PZF wireless mode to S Slave.
UPC - 044701007098
View all Samsung GX10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 216 highlights
Using an External Flash (Optional) ƃ In Wireless Mode 1. Place the SEF-36PZF / SEF-54PZF at the desired location. 2. Set the SEF-36PZF / SEF-54PZF power switch to [WIRELESS]. 3. Set the SEF-36PZF / SEF-54PZF wireless mode to S (Slave). 4. Turn the camera mode dial and set the exposure mode to P, Tv, Av or M mode. 5. Set the SEF-36PZF / SEF-54PZF power switch on the camera to [WIRELESS]. 6. Set the SEF-36PZF / SEF-54PZF wireless mode on the camera to M (Master) or C (Control). INFORMATION ƃ Wireless mode is not available for the built-in flash. ƃ Set the SEF-36PZF / SEF-54PZF wireless slave mode to SLAVE1. Wireless Flash Control (P-TTL Flash Mode) The following information is exchanged between the two SEF-36PZF / SEF-54PZF flash units before the flash is discharged when the SEF-36PZF / SEF-54PZF is used for wireless flash. Press the shutter release button fully. 1. The cameraŖs flash discharges a pre-flash (the cameraŖs flash mode is transmitted). 2. The external flash unit discharges a pre-flash (the subjectŖs lighting condition is checked). 3. The cameraŖs flash unit discharges a pre-flash (the required flash output is transmitted to the external flash). ſ The cameraŖs flash will discharge another pre-flash to transmit the flash duration in HS (High-speed sync). 4. The external flash discharges the main flash. ſ Set the SEF-36PZF / SEF-54PZF wireless slave mode to SLAVE1. ŝ215Ş