Samsung GX10 User Manual (ENGLISH) - Page 71

Using the Built-in Flash ƈ If you wish to discharge the flash in a dark or backlit location, press the Flash Pop-up button to pop up the flash. Select a flash mode to suit your purpose from the Flash options screen in the Fn menu. You can adjust the flash output with the rear e-dial in any Exposure mode other than Auto mode. The built-in flash is optimum from about 0.7 m to 4 m from the subject. Exposure will not be properly controlled and vignetting may occur when used at a distance closer than 0.7 m (this distance varies slightly depending on the lens being used and set sensitivity). ſ Compatibility of built-in flash and lens Vignetting (darkening of the corners of the image due to a lack of light) may occur depending on the lens being used and the capture conditions. We recommend taking a test shot to confirm this. INFORMATION ƃ When using the built-in flash, remove the lens hood before shooting. ƃ The built-in flash fully discharges for lenses without a function to set aperture lens ring to A (Auto). Auto discharge Fill-in Flash Auto flash+Redeye reduct Fill-in Flash+Red-eye Slow-speed sync Slow-speed sync+Red-eye Trailing curtain sync Discharges the flash automatically in dark or backlit locations. The built-in flash discharges manually. When the pop-up flash is closed, the flash doesn't discharge. When the flash is opened, the flash will discharge. Lights a red-eye reduction light before automatic flash. The built-in flash discharges manually. Lights a red-eye reduction light before manual flash. Sets the shutter speed to capture the background clearly. Sets the shutter speed to capture the background clearly and also lights a red-eye reduction light before automatic flash. Discharges flash immediately before closing the shutter curtain. ŝ70Ş