Toshiba 50L3400U User's Guide for 40L3400U and 50L3400U Series TV's - Page 58
Tuning to the next programmed channel, Tuning to a specific channel programmed or unprogrammed,
View all Toshiba 50L3400U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
58 SettingupyourTV Tuning to the next programmed channel Tuning to the next programmed channel To tune to the next programmed channel, press the CH ▲/▼ (arrow) buttons on the remote control or TV control panel. This feature will not function until you have programmed channels into the TV's channel memory, see "Storing channels in memory (optional)" on page 49. Tuning to a specific channel (programmed or unprogrammed) To tune analog channels: Press the Channel Number (0-9) on the remote control. For example, to select channel 125, press 1, 2, 5, and then press the OK button. Tuning digital channels: Press the Channel Number (0-9) on the remote control, followed by the (Dash 100) button, and then the sub-channel number. For example, to select digital channel 125-1, press 1, 2, 5, -, 1, and then press the OK button. If a digital channel is not programmed, either through the automatic channel scan or the Channel add function, see "Auto Tuning" on page 49, you will have to tune the RF channel using the Channel Numbers and the (Dash 100) button on the remote control. Switching between two channels using Channel Return The Channel Return feature allows you to switch between two channels without entering an actual channel number each time. 1 Select the first channel you want to view. 2 Select a second channel using the Channel Number buttons (and the (Dash 100) button if selecting a digital channel). 3 Press the CH RTN button on the remote control. The previous channel will display. Each time you press the CH RTN button, the TV will switch back and forth between the last two channels that were tuned.