Western Digital WDBACA0010BBK User Manual - Page 14
Power Button and LED Indicator, Component, Description
UPC - 718037772370
View all Western Digital WDBACA0010BBK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Power Button and LED Indicator WD TV Live Hub Media Center User Manual 1 2 3 Item 1 2 3 Component Power button Power LED (WD logo) Infrared receiver Description • When power LED is on: - Press the power button to power down the media center. The internal drive is put in sleep mode and other devices can still access it. - Press and hold for five seconds to completely shut down the device and make the internal drive inaccessible. • When power LED is off-Press the power button to power on the media center and wake the internal drive. • On-The power cable is connected and the power is on. • Off-The media center is in standby mode , turned off, or the power cable is disconnected. • Steady flashing- A USB device has been discovered and the unit is being mounted in the system. If the Media Library is set to On in the Setup options (see "Media Library Compilation" on page 30), the LED flashes at the same steady constant rate. • Three short flashes followed by three long flashed followed by three short flashes-A system diagnostic failure has occurred. See "Troubleshooting" on page 147. • Receives signals from the remote control. Point the tip of the remote control to the infrared receiver and ensure that the path between the two is unobstructed. FEATURES AND FUNCTIONS - 10