Xerox 2121MB User Guide - Page 134
Communication error codes, Code 07 - Disconnected
UPC - 095205428667
View all Xerox 2121MB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
Maintenance Communication error codes The communication error codes appear in the logs and transmission reports. General codes Code 01 - Busy or no fax answer This code appears after 6 failed attempts. Call later. Code 03 - User break A communication has been stopped by the user pressing the key. Code 04 - Non programmed number A number saved as a one-touch key or abbreviated number is not valid (example: a delayed transmission was programmed with a one-touch key and this key has been deleted in the meantime). Code 05 - Scanning default An incident occurred with the scanner, for example, the sheet is jammed. Code 06 - Printer default An incident occurred in the printer: no paper, paper jam, opened cover, etc. In the reception mode, this incident appears only if the reception setting is switched to WITHOUT PAPER (refer to Reception without paper on page 4-6). Code 07 - Disconnected The line has been cut (bad line). Check the number and try again. Code 08 - Quality The document you sent was not received. Contact your subscriber. Code 0A - No document to be polled You tried to poll a document from an empty mailbox or the password entered was incorrect. 7-16