Yamaha CLP-480 Owner's Manual - Page 49
Connections
View all Yamaha CLP-480 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Connections Connectors CAUTION Before connecting this instrument to other electronic components, turn off the power to all the components. Before turning the power on or off to all components, set all volume levels to minimum (0). Otherwise, electrical shock or damage to the components may occur. For information about location of these connectors, refer to "Panel Controls and Terminals" on page 11. Terminals under the keyboard Left of the panel [USB TO DEVICE] terminal This terminal allows connection to USB storage devices. Refer to "Precautions when using the [USB TO DEVICE] terminal" on page 51. USB [TO HOST] terminal This terminal allows direct connection to a personal computer. Refer to "Connecting a computer" on page 52 for more information. MIDI [IN], [OUT], [THRU] terminals Use MIDI cables to connect external MIDI devices to these connectors. Refer to "Connecting External MIDI Devices" on page 53 for more information. NOTE There are two different types of USB terminals on the instrument: [USB TO DEVICE] and USB [TO HOST]. Take care not to confuse the two terminals and the corresponding cable connectors. Be careful to connect the proper plug in the proper direction. [AUX PEDAL] jack A separately sold FC7 foot controller or FC4/FC5 foot switch can be connected to this jack. By using an FC7 you can control the volume while playing to add expression to your performance, or control various other functions. By using an FC4/FC5, you can switch various selected functions on/off. To select the function that will be controlled, use the "AuxPedalFunc" (page 65) of the VOICE SETTING. The [PLAY/PAUSE] function can also be assigned to a foot switch (page 70). NOTE Connect or disconnect the pedal when the power of this instrument is turned off. AUX OUT [L/L+R], [R] jacks These jacks let you connect the Clavinova to external powered speaker systems, for playing in larger venues at higher volumes. NOTICE When the Clavinova's AUX OUT jacks are connected to an external system, first turn on the power to the Clavinova, then to the external system. Reverse this order when you turn the power off. NOTE Never route the sound output from the AUX OUT jacks to the AUX IN jacks. When the sound from the AUX OUT jacks is routed to the AUX IN jacks, the input sound will be output from the speaker of this instrument. The output sound may be excessively loud and may cause noise. 49 Advanced Functions Connections