Yamaha CLP-480 Owner's Manual - Page 64
Adjusting the depth of the DSP effect, Adjusting the brightness of
View all Yamaha CLP-480 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Turning the Vibraphone vibrato effect on/off* VibeRotorOnOff This will be displayed only if VibeRotor is selected for the DSP Type parameter explained above. It turns on/off the vibrato effect that is applied when you use the VibeRotor pedal. Store the setting. VibeRotorOnOff Main(GrndPno ) Set?_ > Off Select a Voice part. Setting range: On/Off Default setting: Differs depending on the Voice. Set the value. Setting the rotation speed of the rotary speaker* RotarySpeed This will be displayed only if Rotary is selected for the DSP Type parameter explained above. It sets the rotation speed of the rotary speaker effect. Store the setting. RotarySpeed Main(GrndPno ) Set?_ > Slow Select a Voice part. Setting range: Slow/Fast Default setting: Differs depending on the Voice. Set the value. Adjusting the depth of the DSP effect* DSP Depth This sets the depth of the DSP effect (page 63). Some DSP Type settings do not allow you to set the DSP Depth. Store the setting. DSP Depth Main(GrndPno ) Set?_ > 26 Select a Voice part. 64 Detailed Settings Detailed settings for Voices - [VOICE SETTING] Set the value. Setting range: 1 (output only the original sound with almost no effect applied) - 127 (output only the sound processed by the effect) Default setting: Differs depending on the Voice. Adjusting the brightness of the sound* Brightness NOTE Brightness may have little audible effect or not be applied to some Voices. Store the setting. Brightness Main(GrndPno ) Set?_ > 0 Select a Voice part. Set the value. Setting range: -64 - +63 (The higher the value, the brighter the sound.) Default setting: Differs depending on the Voice. Adjusting the resonance effect* HarmonicContent Resonance can produce a distinctive "peaky" tone, making the sound brighter and harder. NOTE Harmonic content may have little audible effect or not be applied to some Voices. Store the setting. HarmonicContent Main(GrndPno ) Set?_ > 0 Select a Voice part. Setting range: -64 - +63 Default setting: Differs depending on the Voice. Set the value. Setting the touch sensitivity* TouchSense This parameter enables determines the manner and degree to which the volume level changes in response to your touch on the keyboard (how hard you play). Since