Yamaha CLP-480 Owner's Manual - Page 63

Setting the chorus depth, Selecting the DSP type, Setting the speed of the Vibraphone, vibrato effect

Get Yamaha CLP-480 PDF manuals and user guides View all Yamaha CLP-480 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 63 highlights

Setting the chorus depth* ChorusSend NOTE The reverb effect is not applied if the ChorusSend parameter is set to "0." Store the setting. ChorusSend Main(GrndPno ) Select a Voice part. Setting range: 0 - 127 Default setting: Differs depending on the Voice. Set?_ > 48 Set the value. Setting the chorus on/off* ChorusOnOff You can set the [CHORUS] button on or off for each Voice. When you select a Voice, the chorus on/off setting for the Voice automatically changes according to this parameter. NOTE Even if this parameter is turned on, the chorus effect is disabled if the ChorusSend parameter is set to 0. Store the setting. ChorusOnOff Main(GrndPno ) Set?_ > Off Select a Voice part. Setting range: On/Off Default setting: Differs depending on the Voice. Set the value. Selecting the DSP type* DSP Type You can select other effects (than reverb and chorus). Store the setting. DSP Type Set?_ > Main(GrndPno ) DamperReso Setting range: • DamperReso (Damper Resonance) Simulates resonance obtained by pressing the damper pedal. • DelayLCR Delay applied at left, center, and right positions. • DelayLR Delay applied at left and right positions. • Echo Echo-like delay • CrossDelay Left and right delays are crossed. • Symphonic Adds a rich and deep acoustic effect. • Rotary Adds the vibrato effect of a rotary speaker. • Tremolo The volume level changes in rapid cycles. • VibeRotor The vibrato effect of a vibraphone. • AutoPan The sound pans left to right and back and forth. • Phaser The phase changes periodically, swelling the sound. • AutoWah The center frequency of the wah filter changes periodically. • Off No effect. Default setting: Differs depending on the Voice. Setting the speed of the Vibraphone vibrato effect* VibeRotorSpeed Rotor: The rotating portion of an electrical device etc. This will be displayed only if VibeRotor is selected for the DSP Type parameter explained above. This sets the speed of the vibrato effect that is applied when you have selected Vibraphone and are using the VibeRotor pedal. Store the setting. VibeRotorSpeed Main(GrndPno ) Set?_ > 6 Select a Voice part. Setting range: 1 - 10 Default setting: Differs depending on the Voice. Set the value. Select a Voice part. Set the value. Detailed Settings 63 Detailed settings for Voices - [VOICE SETTING]

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
63
Detailed Settings
Detailed settings for Voices — [VOICE SETTING]
NOTE
The reverb effect is not applied if the ChorusSend parameter is set
to “0.”
Setting range:
0 – 127
Default setting:
Differs depending on the Voice.
You can set the [CHORUS] button on or off for each
Voice. When you select a Voice, the chorus on/off setting
for the Voice automatically changes according to this
parameter.
NOTE
Even if this parameter is turned on, the chorus effect is disabled if
the ChorusSend parameter is set to 0.
Setting range:
On/Off
Default setting:
Differs depending on the Voice.
You can select other effects (than reverb and chorus).
Setting range:
•
DamperReso (Damper Resonance)
Simulates resonance obtained by pressing the damper pedal.
•
DelayLCR
Delay applied at left, center, and right positions.
•
DelayLR
Delay applied at left and right positions.
•
Echo
Echo-like delay
•
CrossDelay
Left and right delays are crossed.
•
Symphonic
Adds a rich and deep acoustic effect.
•
Rotary
Adds the vibrato effect of a rotary speaker.
•
Tremolo
The volume level changes in rapid cycles.
•
VibeRotor
The vibrato effect of a vibraphone.
•
AutoPan
The sound pans left to right and back and forth.
•
Phaser
The phase changes periodically, swelling the sound.
•
AutoWah
The center frequency of the wah filter changes periodically.
•
Off
No effect.
Default setting:
Differs depending on the Voice.
Rotor:
The rotating portion of an electrical device etc.
This will be displayed only if VibeRotor is selected for the
DSP Type parameter explained above. This sets the speed
of the vibrato effect that is applied when you have selected
Vibraphone and are using the VibeRotor pedal.
Setting range:
1 – 10
Default setting:
Differs depending on the Voice.
Setting the chorus depth*
ChorusSend
Setting the chorus on/off*
ChorusOnOff
Selecting the DSP type*
DSP Type
ChorusSend
Set?
_
>
Main(GrndPno )
48
Store the setting.
Set the value.
Select a Voice part.
ChorusOnOff
Set?
_
>
Main(GrndPno )
Off
Store the setting.
Set the value.
Select a Voice part.
DSP Type
Set?
_
>
Main(GrndPno )
DamperReso
Store the setting.
Set the value.
Select a Voice part.
Setting the speed of the Vibraphone
vibrato effect*
VibeRotorSpeed
VibeRotorSpeed
Set?
_
>
Main(GrndPno )
6
Store the setting.
Set the value.
Select a Voice part.