ZyXEL P-2812HNU-F1 User Guide - Page 23
The WLAN Button - user manual
View all ZyXEL P-2812HNU-F1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Chapter 1 Introduction You can set up a wireless network with WPS (WiFi Protected Setup) or manually add a client to your wireless network. Figure 3 Wireless Connection Application WLAN WAN LAN 1.3 The WLAN Button You can use the WLAN ON/OFF button on top of the device to turn the wireless LAN on or off. You can also use it to activate WPS in order to quickly set up a wireless network with strong security. Turn the Wireless LAN On or Off 1 Make sure the POWER LED is on (not blinking). 2 Press the WLAN ON/OFF button for one second and release it. The WLAN/WPS LED should change from on to off or vice versa. Activate WPS 1 Make sure the POWER LED is on (not blinking). 2 Press the WLAN ON/OFF button for more than five seconds and release it. Press the WPS button on another WPS -enabled device within range of the Device. The WLAN/WPS LED should flash while the Device sets up a WPS connection with the wireless device. Note: You must activate WPS in the Device and in another wireless device within two minutes of each other. See Chapter 6 on page 142 for more information. P-2812HNU(L)-Fx Series User's Guide 23