ZyXEL P-2812HNU-F1 User Guide - Page 292
Subnetting
View all ZyXEL P-2812HNU-F1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 292 highlights
Appendix A IP Addresses and Subnetting The following table shows some possible subnet masks using both notations. Table 97 Alternative Subnet Mask Notation SUBNET MASK ALTERNATIVE LAST OCTET NOTATION (BINARY) 255.255.255.0 /24 0000 0000 255.255.255.128 /25 1000 0000 255.255.255.192 /26 1100 0000 255.255.255.224 /27 1110 0000 255.255.255.240 /28 1111 0000 255.255.255.248 /29 1111 1000 255.255.255.252 /30 1111 1100 LAST OCTET (DECIMAL) 0 128 192 224 240 248 252 Subnetting You can use subnetting to divide one network into multiple sub-networks. In the following example a network administrator creates two sub-networks to isolate a group of servers from the rest of the company network for security reasons. In this example, the company network address is 192.168.1.0. The first three octets of the address (192.168.1) are the network number, and the remaining octet is the host ID, allowing a maximum of 28 - 2 or 254 possible hosts. The following figure shows the company network before subnetting. Figure 140 Subnetting Example: Before Subnetting You can "borrow" one of the host ID bits to divide the network 192.168.1.0 into two separate subnetworks. The subnet mask is now 25 bits (255.255.255.128 or /25). The "borrowed" host ID bit can have a value of either 0 or 1, allowing two subnets; 192.168.1.0 /25 and 192.168.1.128 /25. 292 P-2812HNU(L)-Fx Series User's Guide