3Ware 7000-2 User Guide - Page 74
3Ware 7000-2 - Escalade RAID Controller Manual
UPC - 693494700022
View all 3Ware 7000-2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
3ware Escalade ATA RAID Controller User Guide Installing the ATA RAID controller on systems that boot from a different device Materials required: • 3ware CD-ROM (You will be required to create a 3ware Windows Driver Installation Diskette from the files located on the 3ware CD-ROM. Please refer to the "Readme.txt" file on the 3ware CD-ROM for directions.) Create disk arrays Refer to the 3ware Hardware Installation and 3ware Disk Array Configuration Utility chapters. Install the 3ware driver 1 Log in as system administrator when the system finishes booting. 2 Go to the Start menu, click on Settings and open the Control Panel window. 3 Open SCSI Adapters from the Control Panel window. 4 Click on the Drivers tab in SCSI Adapters. 5 Follow the instructions in the Install/Upgrade 3ware driver section (page 77) to continue. Reboot the machine 1 Remove the driver diskette, then select Yes to restart the system. If you don't remove the diskette, the system may not boot. 2 Log in as system administrator. You should see a brief splash screen followed immediately by an "Installation Complete" notification. 3 Partition and format any new disk arrays or independent disks using Disk Administrator in the remaining steps: a Choose Programs from the Start menu. 74 www.3ware.com