3Ware 7000-2 User Guide - Page 85
3Ware 7000-2 - Escalade RAID Controller Manual
UPC - 693494700022
View all 3Ware 7000-2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Windows® 98/ME Installation Installing the ATA RAID controller while installing Windows 98/ME Materials required: • 3ware CD-ROM (You will be required to create a 3ware Windows Driver Installation Diskette from the files located on the 3ware CD-ROM. Please refer to the "Readme.txt" file on the 3ware CD-ROM for directions.) Create disk arrays Refer to the 3ware Hardware Installation and 3ware Disk Array Configuration Utility chapters. Boot the system from the Windows 98/ME diskette 1 Insert Windows 98/ME boot disk into the floppy drive. 2 Restart your computer. 3 From the Windows 98 or ME Startup Menu, choose 1. Start computer with CD-ROM support. Partition the boot device using fdisk 1 If your disks have not been partitioned you will get a message like "Windows has detected that drive C does not contain a valid FAT or FAT32 partition". From the MS-DOS command prompt, run fdisk to create a partition. A:\> fdisk 2 When asked to enable large disk support indicate "yes" by typing Y. 3 Under FDISK Options select option 1, Create a DOS partition or Logical DOS Drive. 4 Under Create a DOS Partition or Logical DOS Drive select option 1, Create a Primary DOS partition. www.3ware.com 85