Brother International ADS-2500We Users Guide - Page 164
Carrier Sheet, in 1Letter
![]() |
View all Brother International ADS-2500We manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
Scan Using the Control Panel Setting Brightness Contrast Description Applicable Feature Image OCR E-mail File Adjust the setting (-50 to 50) to get the best image. The Yes Yes Yes Yes default value of 0 represents an average and is usually suitable for most images. You can set the Brightness level by dragging the slider to the right or left to lighten or darken the image. You can also enter a value in the box to set the level. If the scanned image is too light, set a lower Brightness level and scan the document again. If the image is too dark, set a higher Brightness level and scan the document again. Adjust the setting (-50 to 50) to get the best image. The Yes Yes Yes Yes default value of 0 represents an average and is usually suitable for most images. You can increase or decrease the contrast level by moving the slider to the right or left. An increase emphasizes dark and light areas of the 6 image, while a decrease reveals more details in grey areas. You can also enter a value in the box to set the Contrast. NOTE The Contrast setting is only available when setting Scan Type to Auto, Gray (Error Diffusion), True Gray or 24bit Color. Default Carrier Sheet Mode Restore all settings to their factory default values. Yes Yes Yes Yes Scan the following documents using the Carrier Sheet. Yes Yes Yes Yes For this mode, you can select any setting other than Auto from the Document Size drop-down list. Large-sized Documents (A3, B4 and Ledger) Fold the document in half and insert it in the Carrier Sheet for 2-sided (duplex) scanning, then both front and back pages will be combined into a single page. Select 2 in 1(A4) for an A3 document, 2 in 1(B5) for a B4 document or 2 in 1(Letter) for a Ledger document from the Document Size drop-down list. Important documents (photos, contracts) Thin paper (receipts) Irregular-shaped paper (clippings) NOTE • Load only one Carrier Sheet at a time. • Set the document in the center of the Carrier Sheet and align the top of the document with the top of the Carrier Sheet. 151
![](/manual_guide/products/brother-international-ads2000e-users-guide-a2d7964/164.png)