Brother International ADS-2500We Users Guide - Page 82

Scan Using Your Computer Setting Document Size Description Applicable Feature Image OCR E-mail File Document size is set to Auto by default. You can scan Yes Yes Yes Yes documents of any size without making any adjustments to Document Size. 1 For faster scan speeds, you can select the exact size of your document from the Document Size drop-down list. Print Yes NOTE • If you select a 1 to 2 document size, the scanned image will be divided into two documents that are half the size of the setting. If you select 1 to 2 (A4), 5 the scanned image will be divided into two A5-size documents. • To do 1 to 2 scanning, unselect the Auto Image Rotation check box in the Advanced Settings dialog box. • If you select a 2 in 1 document size, two scanned images will be combined into one document. • You can select Long Paper when you configure the settings as following: • Auto Deskew: Off • 2-sided Scanning: Off • Each Long Paper option can scan a large document up to following: Long Paper (Normal Width) 8 1/2 in (215.9 mm): 8 1/2 × 34.0 in. (215.9 × 863.0 mm) Long Paper (Narrow Width) 4 1/4 in (107.9 mm): 4 1/4 × 34.0 in. (107.9 × 863.0 mm) Brightness Adjust the setting (-50 to 50) to get the best image. The Yes Yes Yes Yes Yes default value of 0 represents an average and is usually suitable for most images. You can set the Brightness level by dragging the slider to the right or left to lighten or darken the image. You can also enter a value in the box to set the level. If the scanned image is too light, set a lower Brightness level and scan the document again. If the image is too dark, set a higher Brightness level and scan the document again. 1 Depending upon the condition of the original document, this function may not work properly. 69