Brother International MFC-9700 Users Manual - English - Page 199
Cleaning the Drum Unit, Replacing the Toner Cartridge, TONER LOW - replacement drum
View all Brother International MFC-9700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 199 highlights
Cleaning the Drum Unit We recommend placing the drum unit on a drop cloth or large disposable paper to avoid spilling and scattering toner. 1 Clean the primary corona wire inside the drum unit by gently sliding the tab from right to left several times. 2 Return the tab and snap it into the Home position ( ). Corona Wire Tab Home Position ( ) Caution If the tab is not at Home position ( ), printed pages may have vertical stripes. 3 Reinstall the drum unit into the MFC. (See Replacing the Drum Unit, page 21-21.) 4 Close the front cover. 5 Plug in the power cord first, then the telephone cord. Replacing the Toner Cartridge The MFC can print up to 6,000 pages using a high yield toner cartridge. When the toner cartridge is running low, the LCD shows TONER LOW. The MFC is supplied with a standard toner cartridge that must be replaced after approximately 3,000 pages. Actual page count will vary depending on your average document type (i.e., standard letter, detailed graphics). Note It is a good idea to keep a new toner cartridge ready for use when you see the TONER LOW warning. Discard the used toner cartridge according to local regulations. If you are not sure of them, your local Sanitation Department. Be sure to seal the toner cartridge tightly so toner powder does not spill out of the cartridge. When discarding used toner cartridges, keep them separate from domestic garbage. We recommend that you clean the MFC when you replace the toner cartridge. T R O U B L E S H O O T I N G A N D R O U T I N E M A I N T E N A N C E 21 - 18