Brother International MFC-9700 Users Manual - English - Page 57

Setting the Print Density You can adjust print density, making your printed pages darker or lighter than the original. 1 Press Menu, 2, 1, 5. 2 Press to make print lighter, or to make print darker. 5.PRINT DENSITY 3 Press Stop/Exit . Advanced Receiving Operations Operation from Extension Telephone If you answer a fax call on an extension phone (or on an external phone in the EXT. jack), you can make your MFC take over by using the Fax Receive Code. When you press the Fax Receive Code 5 1, the MFC starts to receive a fax. (See Easy Receive, page 5-3.) If you answer a call at an extension or external phone, and no one is on the line, assume you're receiving a fax. At an extension phone, press 5 1, wait for fax receiving tones (chirps), then hang up. At an external phone, press 5 1 and wait for the phone to be disconnected (the LCD shows RECEIVING) before you hang up. (Your caller will have to press Fax Start to send the fax.) Changing the Fax Receive Code The preset Fax Receive Code ( 5 1) may not work with some telephone systems. If you are always disconnected when accessing your external TAD remotely, try changing the Fax Receive Code from 5 1 to # # #. 1 Press Menu, 2, 1, 3. 2 Press or to select ON (or OFF), and then press Set. 3 If you want to, enter a new Fax Receive Code, and then press Set. 4 Press Stop/Exit. 3.REMOTE CODE REMOTE ACT.:ON? FAX RECEIVE:*51 SETUP RECEIVE 5-4