Brother International MFC-9700 Users Manual - English - Page 25

MFC-9700 Control Panel Overview 6 54 3 2 1 12 11 10 78 9 1 LCD (Liquid Crystal Display) The LCD displays messages to help you set up and operate your MFC. 2 Stop/Exit Stops a fax, cancels an operation, or exits from menu mode. 3 Dial Pad Dials phone and fax numbers, and can be used as a keyboard for entering information into the MFC. (For Canada only): The # key lets you switch the dialing type during a telephone call from PULSE to TONE. 4 Receive and Dialing Keys: Receive mode Use to select how the MFC will handle incoming calls. 6 One Touch Keys These 4 keys give you instant access to 8 previously stored auto dial numbers. 7 Fax Start Starts an operation, such as sending a fax. 8 Fax Resolution Sets the resolution when you send a fax. 9 Programming Keys: Menu Lets you access the menu and programing mode. (Left Arrow) (Right Arrow) Moves the LCD cursor through text and options. Redial / Pause Redials the last number that was called. Also inserts a pause in auto dial numbers. Search/Speed Dial Lets you look up numbers stored in the dialing memory. Also lets you dial stored phone numbers by pressing a # plus a two-digit number. 5 Shift To access memory locations 5 through 8 in the One Touch keys hold down the Shift key. Set Stores a menu setting in the MFC. Also used for sending one fax to multiple numbers. (For details, see Broadcasting, page 7-5.) 0 Copy Keys (Temporary Settings): Enlarge/Reduce Lets you reduce or enlarge copies depending upon the ratio you select. Contrast Lets you make a copy that is lighter or darker than the original. INTRODUCTION 1-3