Brother International MFC-9700 Users Manual - English - Page 70
Delayed Batch Transmission, Setting Up for Polling Transmit
View all Brother International MFC-9700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
The MFC starts scanning the original into memory. It will wait until the time you have entered to send the fax. The number of pages you can scan into memory varies with the data they contain. Delayed Batch Transmission Before sending the delayed faxes, your Brother MFC will economize by sorting all the messages in memory by destination and scheduled time. All delayed faxes scheduled at the same time to the same fax number will be sent as one transmission. 1 Press Menu, 2, 2, 5. 2 Press or to select ON (or OFF), and then press Set. 5.BATCH TX 3 Press Stop/Exit to exit. Setting Up for Polling Transmit Polling Transmit is when you set up your MFC to wait with an original in the ADF so another fax machine can retrieve it. 1 Place the original face up in the ADF, or face down on the scanner glass. 2 Press Menu, 2, 2, 7. 3 Press or to choose ON (or OFF), and then press Set. 7.POLLED TX 4 Press 1 if you want to select additional settings. The LCD returns to the SETUP SEND menu-OR-Press 2 if you are finished choosing settings. 5 Press Fax Start and wait for the fax to be polled. Note If you pressed 1 in Step 4, the original remains in the ADF until your MFC is polled. If you must use your MFC before the polled transmit occurs, you must cancel this job. 6 - 11 S E T U P S E N D