Brother International MFC-9700 Users Manual - English - Page 82

4 If your pager requires a PIN, enter the PIN, and then press #, press Redial/Pause, enter your fax number followed by # #, and then press Set. For example, 1 2 3 4 5 # Redial/Pause 1 8 0 0 5 2 1 2 8 4 6 # #. -OR- If you do not need a PIN, press Redial/Pause, enter your fax number followed by # #, and then press Set. For example, Redial/Pause 1 8 0 0 5 2 1 2 8 4 6 # #. 5 Press Stop/Exit. You cannot change a Paging number or PIN remotely. Press Redial/Pause for each 3.5 second delay, as needed. Setting Fax Storage If you set Fax Storage to ON, you will be able to retrieve fax messages from another location using Fax Forwarding, Paging or Remote Retrieval operations. The LCD will indicate when you have a fax stored in memory. The LCD prompts you to choose a fax setting. 1 Press Menu, 2, 5, 2. 2 Press or to select ON (or OFF), and then press Set. 3 Press Stop/Exit. 2.FAX STORAGE If there are faxes in memory when you turn Fax Storage OFF, you must choose to delete them or exit without turning Fax Storage on. 4 Press 1 to erase faxes from memory and to turn off Fax Storage. -OR- Press 2 to exit without deleting faxes or changing this setting. (See Printing a Fax in Memory, page 5-5.) ERASE ALL FAX? 1.YES 2.NO Backup Print If you have set FAX STORAGE to ON, your MFC automatically prints faxes as they are received into memory. This is a safety feature in case the power goes out so you won't lose your message. 9-2 REMOTE FAX OPTIONS