Brother International PR670E Operation Manual - Page 111

EMBROIDERING SETTINGS Specifying the manual color sequence Note • The manual color sequence cannot be changed while operations are being performed in the embroidering screen. Touch , and then display page 5 of the a settings screen. Touch , and then select the manual b color sequence. • When the embroidery machine is purchased, "OFF" is selected. Touch c screen. to return to the previous  The icon for the manual color sequence appears in the screen. Using the manual color sequence ■ Manually assign thread colors to all needle bars By specifying the thread colors used with this machine, sewing can continue more efficiently simply by changing the needle bar assignments after a pattern is selected. With the normal method of specifying settings, only a maximum of 5 needle bars can be manually assigned thread colors; however, with the manual color sequence, all 6 needle bars can be assigned thread colors. (For details on specifying the settings, refer to "Reserved Needle Bar and Sewing Speed Settings" on page 120.) ■ Needle bar number settings The needle bar used with each thread color can be specified. 4 Memo • Using the procedure described in "Reserved Needle Bar and Sewing Speed Settings" on page 120, the finished embroidery colors can be checked in the screen if thread colors are assigned to thread spools. In the embroidering settings screen, touch a .  A screen appears, allowing the needle bar numbers to be selected. From the thread color sequence display, b select the thread color whose needle bar is to be changed. • If the desired thread color is not displayed, use the scroll bar on the right side to display it. 1 1 Scroll bar 109