Brother International PR670E Operation Manual - Page 201
Sewing a pattern aligned with a, mark on the fabric
![]() |
View all Brother International PR670E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 201 highlights
APPENDIX Sewing a pattern aligned with a mark on the fabric With a fabric marker, mark this point on the c fabric. By specifying the beginning of stitching and the end of stitching, the exact position of the pattern can be checked. For example, when sewing text along a line in the fabric pattern, the beginning of the stitching can be set in the lower-left corner so that the position can be checked, and then the beginning of stitching can be reset. Next, the beginning of stitching can be set in the lower-right corner to check the position. The straight line connecting the first point and the second point is the baseline for the text. If the baseline that the text follows leaves the fabric pattern, the embroidering position can be adjusted. Touch in the embroidering settings a screen. Memo • If the LED pointer is set to "ON", it shows you the needle drop point. Set the beginning of stitching in the lowerd right corner. Set the beginning of stitching in the lowerb left corner. The frame moves so that the needle drop point aligns with the beginning of stitching. With a fabric marker, mark this point on the e fabric. 7 The frame moves so that the needle drop point aligns with the beginning of stitching. Remove the embroidery frame from the f machine, and then connect these two points to check the embroidering position. • If the baseline is misaligned or intersects another line, reframe the fabric in the embroidery frame or adjust the position of the pattern. 199
![](/manual_guide/products/brother-international-pr670e-operation-manual-db31d3a/201.png)