Brother International PR670E Operation Manual - Page 187
Specifying the remaining length, of thread, Selecting the Eco Mode or, Shutoff Support Mode
![]() |
View all Brother International PR670E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 187 highlights
BASIC SETTINGS AND HELP FEATURE Touch and to select the stitch length. a The desired size is displayed. Selecting the "Eco Mode" or "Shutoff Support Mode" • A value between 0 and 1 millimeters if the units of measurements is set to "mm" (or a value between 0 and 0.04 inch if the units of measurements is set to "inch") can be specified. Note • If the setting is changed from the previous setting, the new setting is only applied to the next embroidery. Specifying the remaining length of thread This setting specifies whether the length of upper thread that remains threaded through the needle after the thread is trimmed (length of thread passed through the eye of the needle) has a standard tail or long tail. When the embroidery machine is purchased, "Standard Tail" is selected. The setting for the remaining length of thread can be specified from page 2 of the settings screen. Touch and to select the setting. a The desired length is displayed. You can save the machine power by setting the eco mode or the shutoff support mode. If you leave the machine without using for a specified period of time, the machine enters in one of these modes. "Eco Mode"; Machine will enter a sleep mode. Touch the screen or "Start/Stop" button to continue embroidering. "Shutoff Support Mode"; Machine will turn off after set period of time. Turn machine off and then back on to restart embroidering. Condition Eco Mode Available time OFF, 10 - 120 (minute) "Start/Stop" button Green flashing Suspended function After recovering Machine light, Screen display The machine starts from the previous operation. Shutoff Support Mode OFF, 1 - 12 (hour) Green slow flashing All functions You need to turn off the machine. 6 Press the "Start/Stop" button or touch the screen display to recover from these modes. These settings can be specified from page 4 of the settings screen. Use or to select the time until a entering the mode. • If the machine misses stitches with a standard length of thread after it is trimmed, select "Long Tail". • When using metallic thread, select "Long Tail". Note • If you turn off the machine while the machine is in the "Eco Mode" or the "Shutoff Support Mode", wait for about 5 seconds before turning on the machine again. 185
![](/manual_guide/products/brother-international-pr670e-operation-manual-db31d3a/187.png)