Brother International PR670E Operation Manual - Page 95

OTHER BASIC PROCEDURES Switching the Thread Colors on the Screen Touch d colors. to switch the two thread If a thread color on the spool stand is different than the needle position thread color on the screen, the thread colors on the screen can be switched to match the spool stand thread color position. Memo • This function is not available when you set "Manual Color Sequence" to "ON" in settings screen. Touch in the embroidering screen. a After making the desired changes, touch e . 3 ■ To cancel the thread color settings for all previously stitched design  The spool selection screen appears. Touch the number of the first needle bar b that will be switched. • To cancel the selection, touch the same needle number again. Memo • The color settings will be completely canceled even if the machine is in the middle of the embroidery. Touch . a  The thread color setting is canceled. Touch the number of the other needle bar c that will be switched. The two needle numbers are connected with an arrow. • To cancel the selection, touch the same needle number again. Touch . b  Thread colors are assigned by the machine again, regardless of the previous spool setting. Note • This function will not clear anchor settings of any of the needles which have been assigned a thread color (Refer to "Reserved Needle Bar and Sewing Speed Settings" on page 120). 93