Brother International PR670E Operation Manual - Page 155
Changing the text arrangement of, a character, Changing the character spacing
![]() |
View all Brother International PR670E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
SELECTING/EDITING/SAVING PATTERNS After making the desired changes, touch d . The pattern editing screen appears again. CAUTION • After changing the angle of the pattern, check the icons for the embroidery frames that can be used and use only the indicated frames. If a frame other than those indicated are used, the presser foot may hit the embroidery frame and cause injuries. Memo • If in the embroidering settings screen is used, the entire combined pattern can be rotated. (For details, refer to "Rotating the entire pattern" on page 172.) • If the pattern is too large or the pattern is too close to the edge of the embroidery field, all of the rotating options may not apply. Changing the text arrangement of a character Characters can be arranged on a horizontal line, on a slant or on an arc. Touch . a After selecting the desired text c arrangement, the bend of the curve can be adjusted. If necessary, touch and to adjust the bend of the curve. Memo • When selecting , and change to and . You can increase or decrease the incline. If necessary, touch the arrow keys to adjust d the position of the pattern. (For more details, refer to page 148.) After making the desired changes, touch e . The pattern editing screen appears again. Memo • The text arrangement specified when the character was selected on page 132 can be changed at this point. 5 Changing the character spacing The spacing between the characters can be made wider or narrower. Touch . a The screen shown below appears. The character spacing screen appears. • For details on each key, refer to "Changing the text arrangement" on page 132. Touch the key of the desired text b arrangement. 153
![](/manual_guide/products/brother-international-pr670e-operation-manual-db31d3a/155.png)