Brother International PR670E Operation Manual - Page 213
Cleaning around the needle plate
View all Brother International PR670E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 213 highlights
APPENDIX Remove the spacer. Cleaning around the needle plate c If lint and dust collect around the moving knife, the fixed knife or the thread retaining plate, the thread may not be cut correctly and the error message may appear, or various parts of the machine may be damaged. Make sure to clean around the needle plate once a month. Use on offset screwdriver and the included cleaning brush. Turn off the embroidery machine. a CAUTION • Unplug the power supply cord before cleaning the machine, otherwise injuries or an electric shock may occur. Remove the needle plate. b With an offset screwdriver, loosen the screws, and then remove the needle plate, and then open the hook cover. 1 Spacer Use the included cleaning brush to remove d any lint and dust from the moving knife, the fixed knife, the thread retaining plate, and their surrounding areas. 1 Remove all lint in this area After cleaning is finished, install the spacer e back. First, position the spacer so that it hooks around the elliptical notch, then position the spacer so that it surrounds the screw head. Slide the spacer in the direction of the arrow to secure it. 7 1 Needle plate 2 Hook cover 1 Elliptical notch 2 Screw head 211