Brother International PR670E Operation Manual - Page 188

Changing the screen saver settings Touch . a ■ Specifying the length of time until the screen saver is displayed The screen saver is displayed when no machine operation is performed for the specified length of time. A setting between "OFF" (0) and "60" minutes can be set in 1-minute increments. When the embroidery machine is purchased, "5 Touch b . min" is selected. The screen saver settings can be specified from page 4 of the settings screen. Touch and to select the desired a setting. ■ Changing the screen saver image You can select your own personal images for the screen saver of your machine. Before changing the screen saver image, prepare the image on your computer or USB media. When the embroidery machine is purchased, the default setting is selected. The screen saver settings can be specified from page 4 of the settings screen. Compatible image files Format JPEG format (.jpg) File size File dimension Number allowed Max. 2 MB for each image 800 × 1280 pixels or less, (If the width is more than 800 pixels, the image imported will be reduced to a width of 800 pixels.) 5 or less Connect the USB media or the computer c (using a USB cable) that contains your personal image to the USB port of the machine. • Refer to page 74 about USB connectivity. Touch d to select the first image. Note • When using USB media, make sure that it contains only your own personal images to be selected for the screen saver. • Images saved on an SD card cannot be selected for the screen saver. Use images from the computer or USB media. • Folders are recognized. Open the folder that holds your personal images. • The images will appear in a list in this screen. Select the desired number to specify the image. 186