Brother International PR670E Operation Manual - Page 228
large to fit in the extra-large
![]() |
View all Brother International PR670E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 228 highlights
Machine failed to communicate with the PC in the Link mode. Turn off the machine, and on again. The thread trimming button was pressed before the machine was unlocked. Touch to use the thread trimming function. The machine needs maintenance. (Refer to page 216.) The machine is retrieving a previously saved pattern. The machine was stopped while the needle bar case was moving. Touch to automatically reset the needle bar case. The combined character pattern is too large for the embroidery frame. Rotate the pattern 90 degrees and then continue combining characters. The combined character pattern is too large to fit in the extra-large embroidery frame. Change the character pattern combination. The motor has locked up due to tangled thread or for other reasons related to thread delivery. If the thread is entangled in the bobbin case, clean the race, and then oil it. (Refer to page 212 and 216.) The USB media is write-protected. Cancel the write protection. 226
![](/manual_guide/products/brother-international-pr670e-operation-manual-db31d3a/228.png)